Like us on Facebook  
Home support faq video converter Convert Video FAQs
FAQ For WinAVI Video Converter  
Why...? Total 19 item
 

1.Why does my Output file(s) does not have video?

2.When finished converting AVI file(s), there is no sound or very low sound in the output file(s).
3.When converting AVI to DVD/SVCD/VCD...it stops at 99%? (Only for Version 6.3 )
4.When converting a MP4 file to a WMV file and WinAVI crashes.
5.The burned disc can be played with computer, but it cannot be played with DVD player.
6.The "Help" button on the program interface does not work properly:
7.Unable to convert files that are larger than 4GB:(Only for Version 6.3 )
8.Output video plays upside-down:
9.Audio and video are out off sync...
10.WinAVI creates two DVD folders while the settings are for creating one DVD disc:



11.Why Nero6.6.0.8 says that a VCD made by WinAVI is illegal, while Nero 6.3 works very well with a VCD made by WinAVI.(Only for Version 6.3 )
12.Unable to burn to DVD because of a VOB.NAV file in the "Video_TS" folder.
13.Why I can't to download the program properly.
14.Output file(s) does not have video...
15.Output video plays upside-down:
16.WinAVI creates two DVD folders while the settings are for creating one DVD disc:
17.The burned disc can be played with computer, but it cannot be played with DVD player.
18.Source files can be played correctly, but after conversin, it will gets black border at both top and bottom/the picture had been cut.



Q.

A.

1.Why does my output file(s) does not have video?

Please check if you are using a NVidia video card. If so, you might have enabled the full screen video, which would prevent you from converting the video image. So just close the option "full screen video" In addition, you should download a k-lite codec package from http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm to your system.

TOP

 

Q.

A.

2.When finished converting AVI file(s), there is no sound or very low sound in the output file(s):

Please just adjust the AC3Filter. And you can visit http://www.videohelp.com for some more details on how to do that.

TOP

 

Q.

A.

3.When converting AVI to DVD/SVCD/VCD...it stops at 99%?

Please download a new patch named "MMEncoder(1).DLL" from Download page and then save it to the WinAVI VideoConverter folder to replace the original one.

TOP

 

Q.

A.

4.When converting a MP4 file to a WMV file and WinAVI crashes.

You should download a codec from http://www.mpegable.com and then you will be able to do the conversion.

TOP

 

Q.

A.

5.The burned disc can be played with computer, but it cannot be played with DVD player.

The burned disc might not be compatible with your DVD player. Please visit http://www.videohelp.com to find some information on how to make the disc compatible with your DVD player. For example, you can try to use other software to make a disk compatible with stand alone DVD players. (Burn a disk with WinAVI Video Converter, which plays well on your computer, and then copy it disk with DVD X Copy to get a useable DVD for home use).

TOP

 

Q.

A.

6.The "Help" button on the program interface does not work properly:

Please rename the "winaviEN.chm" to "winavi.chm" in the "WinAVI Video converter\help" folder or you can download a new patch named "Major.DLL" from Download page, and then unzip and save it to the WinAVI Video Converter folder to replace the original one.

TOP

 

Q.

A.

7.Unable to convert files that are larger than 4GB:

Please download this package: http://www.winavi.com/download/VideoConverter.zip and save it to the WinAVI Video Converter folder to replace the original one.

TOP

 

Q.

A.

8.Output video plays upside-down:

Please make sure that Windows Media Player can play the source file. If the source file does not have any problems, please select the option "Make picture upside-down" on the "Encoder" tab of the "Advanced" function.
In addition.
And you should download a K-Lite codec package from http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm

TOP

 

Q.

A.

9.Audio and video are out off sync...

Please make sure that Windows Media Player can play the source file. If the source file can be played by WMP, maybe there is something wrong with the codecs on your PC. Please download a K-Lite package from
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Also, if you convert AVI files, please update your DIVX codec to the latest version 5.2 from http://www.divx.com

TOP

 

Q.

A.

10.WinAVI creates two DVD folders while the settings are for creating one DVD disc:

If the movie is too long, the output file will be too large to fit on a normal DVD-R/+R. If so, just correct the problem by manually reselecting a larger output size. (For example, you can change the disc's capacity from 3850MB to 4300MB). Also, you can try resetting it as follows:
Select the "Constant Video Quality" as the output mode, and then change to either "Low" or "Lower" as the output quality. Meanwhile, select the option "Split output size", and then set the split size at 1013MB. Then, the output size will be much smaller, so that you may make it fit on one DVD disc.

TOP

 

Q.

A.

11.Why Nero6.6.0.8 says that a VCD made by WinAVI Video Converter is illegal, while Nero 6.3 works very well with a VCD made by WinAVI.

It is because a VCD made by WinAVI Video Converter is 1152kbps while the new version of Nero 6.6 only works with a 1150KBps VCD. We fixed this problem. Please just click the following link http://www.winavi.com/download/MMEncoder.DLL, to get a new MMEncoder.DLL file, and then save it to the WinAVI Video Converter folder to replace the original one of the program.

TOP

 

Q.

A.

12.Unable to burn to DVD because of a VOB.NAV file in the "Video_TS" folder.

The VOB.NAV file is created because the DVD conversion is not complete and the .IFO file can not be successfully created. So just do the conversion again.
Also, please download a k-lite codec package from http://www.free-odecs.com/download/K_Lite_Codec_Pack.htm

TOP

 

Q.

A.

13.Why I can't to download the program properly.

1) Please check whether virus has infected your computer.
2) Maybe your IE setting is not perfect, please click "Internet option..." under "Tools", and then select the "General" Page, just click "Delete file...", that will be ok!

TOP

 

Q.

A.

14.Output file(s) does not have video...

Please check if you are using a NVidia video card. If so, you might have enabled the full screen video, which would prevent you from converting the video image. So just close the option "full screen video" In addition, you should download a k-lite codec package from
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm to your system.


Q.

A.

15.Output video plays upside-down:

Please make sure that Windows Media Player can play the source file. If the source file does not have any problems, please select the option " Flip the picture upside-down " on the" Encoder " tab of the " Advanced " function. In addition, you should download a K-Lite codec package from
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm

 

Q.

A.

16.WinAVI creates two DVD folders while the settings are for creating one DVD disc:

If the movie is too long, the output file will be too large to fit on a normal DVD-R/+R. If so, just correct the problem by manually reselecting a larger output size. (For example, you can change the disc's capacity from 3850MB to 4300MB). Also, you can try resetting it as follows:
Select the "Constant Video Quality" as the output mode, and then change to either "Low" or "Lower" as the output quality. Meanwhile, select the option "Split output size", and then set the split size at 1013MB. Then, the output size will be much smaller, so that you may make it fit on one DVD disc.


Q.

A.

17.The burned disc can be played with computer, but it cannot be played with DVD player.

The burned disc might not be compatible with your DVD player. Please visit
http://www.videohelp.com to find some information on how to make the disc compatible with your DVD player. For example, you can try to use other software to make a disk compatible with stand alone DVD players. (Burn a disk with WinAVI, which plays well on your computer, and then copy it disk with DVD X Copy to get a useable DVD for home use).
Besides, please also check whether the region (PAL/NTSC) of your DVD disc is the same to your player's if not, that may be the problem. So please change the region on the advanced control panel, and then do the conversion again.

 

Q.

A.

18.Source files can be played correctly, but after conversin, it will gets black border at both top and bottom/the picture had been cut.

Please adjust both "Width" and "Height" at 99% on the "Encode " tab of the "Advanced " control panel. That will be OK!